Photovoltaics from any semiconductor - SolarStar

Chinese
Location: Home >> Text
July2012
Photovoltaics from any semiconductorTags£ºtechnology  low-cost  SFPV system 

 A technology  that would enable low-cost  , high efficiency solar cells to be made from virtually any semiconductor material has been developed by researchers with the U.S. Department of Energy""s Lawrence Berkeley National Laboratory (Berkeley Lab) and the University of California Berkeley. This technology opens the door to the use of plentiful, relatively inexpensive semiconductors, such as the promising metal oxides, sulfides and phosphides, that have been considered unsuitable for solar cells because it is so difficult to tailor their properties by chemical means.

 

"It""s time we put bad materials to good use," says physicist Alex Zettl, who led this research along with colleague Feng Wang. "Our technology allows us to sidestep the difficulty in chemically tailoring many earth abundant, non-toxic semiconductors and instead tailor these materials simply by applying an electric field."

Solar cells convert sunlight into electricity using semiconductor materials that exhibit the photovoltaic effect - meaning they absorb photons and release electrons that can be channeled into an electrical current. Photovoltaics are the ultimate source of clean, green and renewable energy but today""s technologies utilize relatively scarce and expensive semiconductors, such as large crystals of silicon, or thin films of cadmium telluride or copper indium gallium selenide, that are tricky or expensive to fabricate into devices.

"Solar technologies today face a cost-to-efficiency trade-off that has slowed widespread implementation," Zettl says. "Our technology reduces the cost and complexity of fabricating solar cells and thereby provides what could be an important cost-effective and environmentally friendly alternative that would accelerate the usage of solar energy."

This new technology is called "screening-engineered field-effect photovoltaics," or SFPV, because it utilizes the electric field effect, a well understood phenomenon by which the concentration of charge-carriers in a semiconductor is altered by the application of an electric field. With the SFPV technology, a carefully designed partially screening top electrode lets the gate electric field sufficiently penetrate the electrode and more uniformly modulate the semiconductor carrier concentration and type to induce a p-n junction. This enables the creation of high quality p-n junctions in semiconductors that are difficult if not impossible to dope by conventional chemical methods.

"Our technology requires only electrode and gate deposition, without the need for high-temperature chemical doping, ion implantation, or other expensive or damaging processes," says lead author William Regan. "The key to our success is the minimal screening of the gate field which is achieved through geometric structuring of the top electrode. This makes it possible for electrical contact to and carrier modulation of the semiconductor to be performed simultaneously."

Under the SFPV system  , the architecture of the top electrode is structured so that at least one of the electrode""s dimensions is confined. In one configuration, working with copper oxide, the Berkeley researchers shaped the electrode contact into narrow fingers; in another configuration, working with silicon, they made the top contact ultra-thin (single layer graphene) across the surface. With sufficiently narrow fingers, the gate field creates a low electrical resistance inversion layer between the fingers and a potential barrier beneath them. A uniformly thin top contact allows gate fields to penetrate and deplete/invert the underlying semiconductor. The results in both configurations are high quality p-n junctions.

Says co-author Feng Wang, "Our demonstrations show that a stable, electrically contacted p-n junction can be achieved with nearly any semiconductor and any electrode material through the application of a gate field provided that the electrode is appropriately geometrically structured."

The researchers also demonstrated the SFPV effect in a self-gating configuration, in which the gate was powered internally by the electrical activity of the cell itself.

"The self-gating configuration eliminates the need for an external gate power source, which will simplify the practical implementation of SFPV devices," Regan says. "Additionally, the gate can serve a dual role as an antireflection coating, a feature already common and necessary for high efficiency photovoltaics."

About SolarStar

SolarStar has been concentrated in the photovoltaic field since 2008, supplying the latest news, business information, bbs, material downloading, and industry analysis for the photovoltaic professionals.

It is a photovoltaic business interactive platform with 200,000 members covering all of the related fields. So it is the most influential and most well-known network in the photovoltaic in China.

Cooperation
Ms.Cui

Mob:+8618603361882

Email:tracy.cui@bjxmail.com

Ms.Li

Mob:+8613810252521

Email:lijing@bjxmail.com

Contact SolarStar
Address:

12th Floor, Block C, Shitong International Building, Chaoyang District, Beijing,China

TEL:+8610-85759016

FAX:+8610-85758835

¡¤June 2012

¡¤July 2012